Skip to content
Home » All Secret Codes Of Samsung Galaxy Tab A9 & A9+

All Secret Codes Of Samsung Galaxy Tab A9 & A9+


Hi folks, this guide will list out all the tested, untested and GSM Samsung Galaxy Tab A9 & A9+ secret codes and hidden menu codes. These codes are compatible on all Galaxy Tab A9 & A9+ variants like SM-X110, SM-X115, SM-X210, SM-X215, and SM-X216B.

What are Galaxy Tab A9 & A9+ Secret Codes?

Android secret codes, also known as dialer codes or USSD codes, are special codes that can be entered via the phone dialer to access hidden features or perform certain actions. It’s important to note that not all codes work on every Android device, and some may have different results depending on the device and carrier. Additionally, using certain codes may have unintended consequences, so it’s crucial to use them with caution.

Please note that these codes may not work on carrier locked phones unless their bootloader is unlocked. Also some codes may not work after some software/security update. So don’t panic when some codes are not working.

How to execute secret codes on Galaxy Tab A9 & A9+?

To execute the secret codes jut type in the code as shown in the screenshot below and it will run automatically if it’s compatible with your phone. Some codes will not work even if it’s for your model, there can be many reasons like a locked bootloader, carrier firmware lock etc. Even some firmware update/security updates results in blocking of some codes so don’t panic if any of the codes are not working.

So as you can see in the above screenshot just type the code to your normal dialing keypad, and hurray! the code will just execute.

Most Important Galaxy Tab A9 & A9+ Secret Codes (Tested)

The below codes are personally tested on your Samsung Galaxy Tab A9 & A9+ and found working on the factory installed unlocked models. However some codes may not work due to bootloader lock or a security patch.

  • General Test Mode : *#0*#
  • IMEI number : *#06#
  • Dump mode : *#9900#
  • Diagnostic configuration : *#9090#
  • Camera Firmware Menu: *#34971539#
  • Insert Network Lock Keycode : #7465625*638*#
  • Battery status ADC, RSSI reading : *#0228#
  • USB Settings: *#0808#
  • GSM status information : *#0011#
  • Audio Loopback Control : *#0283#
  • View SW Version PDA, CSC, MODEM : *#1234#
  • Software and hardware info : *#12580*369#
  • Audio Loopback Control : *#0283#
  • TSP / TSK firmware update : *#2663#
  • Update Camera Firmware: *#34971539#
  • Check software version: *#1111#
  • Hardware Version : *#2222#

Wort A Try Galaxy Tab A9 & A9+ Secret Codes (Untested)

The below codes are not tested on Galaxy Tab A9 & A9+. Some codes may work and some may not so please don’t panic if some codes are not working.

  • Phone & Battery Usage info: *#*#4636#*#*
  • To change Power button behavior: *#*#7594#*#*
  • To get Bluetooth device address: *#*#232337#*#
  • To test service activity: *#*#197328640#*#*
  • Audio testing: *#*#0673#*#* OR *#*#0289#*#*
  • PDA Info: *#*#4986*2650468#*#*
  • To get RAM info: *#*#3264#*#*
  • Media files backup: *#*#273283*255*663282*#*#*
  • Test LCD Display: *#*#0*#*#*
  • WiFi Test: *#*#232339#*#* OR *#*#526#*#*
  • Factory Data Reset: *#*#7780#*#*
  • For complete data wipe: *2767*3855#
  • Enable voice dialing logging mode: *#*#8351#*#*
  • Field Test: *#*#7262626#*#*
  • Disable voice dialing logging mode: *#*#8350#*#*
  • Build info: *#*#44336#*#*
  • To Do A Packet Loop Test: *#*#0283#*#*
  • Touchscreen test: *#*#2664#*#*
  • GPS Test: *#*#1472365#*#*  &  *#*#1575#*#*
  • To get camera info: *#*#34971539#*#*
  • To get Wifi Mac Address: *#*#232338#*#*
  • Bluetooth Test: *#*#232331#*#*
  • Backlight and vibration testing: *#*#0842#*#*
  • To get touchscreen version: *#*#2663#*#*
  • Proximity sensor test: *#*#0588#*#*

GSM codes for Samsung Galaxy Tab A9 & A9+

Change PIN code – **04* and enter the old PIN code, and twice a new PIN code.
Change PIN2 code – **042* and enter the old PIN2 code, and twice the new PIN2 code.
Unlock SIM (PIN) – **05* and enter the PUK code and new PIN code twice
Unlock SIM (PIN2) – **052* and enter the PUK2 code and new PIN2 code twice

Call Barring (Need to activate the service through your operator)

Change the password for all bans (default – 0000)
– ** 03 * 330 * old pass* new pass*new pass#

Block all outgoing calls

*33*(enter password)# – To Activate
#33*(enter password)# – To Cancel
*#33# – Check Status

Block all calls

*330*(enter password)# – To Activate
#330*(enter password)# – To Cancel
*#330# – Check Status

Block all outgoing international calls

*331*(enter password)# – To Activate
#331*(enter password)# – To Cancel
*#331# – Check Status

Barring of all outgoing international calls when roaming

*332*(enter password)# – To Activate
#332*(enter password)# – To Cancel
*#332# – Check Status

Barring of all outgoing calls on your phone

*333*(enter password)# – To Activate
#333*(enter password)# – To Cancel
*#333# – Check Status

Block all incoming calls

*353*(enter password)# – To Activate
#353*(enter password)# – To Cancel
*#353# – Check Status

Block all incoming calls when roaming

*351*(enter password)# – To Activate
#351*(enter password)# – To Cancel
*#351# – Check Status

Call waiting (you need to activate the service through operator)

*43# – To Activate
#43# – To Cancel
*#43# – Check Status

Show phone number of the caller you (ANI)

#77# – Block
*77# – Allow
*#77# – Check Status

Call Forwarding (activate the service through the operator)

##002# Cancel all diverts
##004# Cancel all conditional call forwarding
**004* phone number # Activate all conditional call forwarding

Unconditional call forwarding (Call Forward All)

###21 Switch off and deactivate
#21# Deactivate
**21*phone number# Enable and Activate
*21# Activate
*#21# Check the condition

Diversion in case of “no answer”

###61 Switch off and deactivate
#61# Deactivate
**61* phone number# Enable and Activate
*61# Activate
*#61# Check the condition

Diversion in case of “not available”

### 62 Switch off and deactivate
# 62 # Deactivate
** 62 *phone number# Enable and Activate
* 62 # Activate
* # 62 # Check the condition

Diversion in case of “busy”

###67 Switch off and deactivate
#67# Deactivate
**67*phone number# Enable and Activate
*67# Activate
*#67# Check the condition

Video Tutorial for Galaxy Tab A9 & A9+ Secret Codes

If still confused how to execute the codes, please watch the video tutorial.

If “All Secret Codes Of Samsung Galaxy Tab A9 & A9+tutorial really helped you, please give a like/share on social networking websites.