Hi folks, this tutorial will help you to manually install Stock ROM / stock firmware Android 14 One UI 6 on all variants of your Samsung Galaxy S24. With this tutorial you may also be able to install the future Android firmware versions like Android 15, Android 16 etc.
So lets proceed with the steps.
However before proceeding please make sure that you have made a complete backup of your phone storage so that you can recover from a worst case scenario. SamsungSFour.Com will not be liable under any circumstance for loss of data or bricking your device. Please proceed at your own risk.
Steps To Install Official Android 14, Stock ROM (One UI 6) On Galaxy S24 Using Odin app
1. First you need to download and install the Samsung USB drivers. You can do that it from the below link;
2. Now we need to enable the developer options, USB debugging and perform the OEM unlock on your Galaxy S24 Smartphone.
To enable “Developer Options” on your Galaxy Smartphone goto Settings>About phone>Software Information, and tap on the “Build number” 10 times until you get a message that you are a “developer“. Now you will see an additional menu entry in the “Settings” menu called “Developer Options” as shown below.
Once you have enabled the “Developer Options” tap on it and you will see a similar screen as shown below (These are from One UI 2.0, if your UI version is something else slight difference maybe there).
Now tap on “OEM unlocking” and “USB debugging” to enable it. If you get a popup warning, tap enable if you would like to proceed.
You may also check this video if you have any doubt about the above process.
In some cases after “OEM unlocking” is enabled you may need to unlock the “Bootloader” also. Please try the below tutorial if you get a failed message in Odin;
3. Once done you need to download the firmware files and the Odin app from the below links.
Please download the files corresponds to your device from the below links;
When you click the above download link you will be redirected to a model list page from there you can navigate to a 3rd party website were you can download the files. Make sure that your phones bootloader is not locked by any carrier, if so please unlock it first before proceeding with the firmware installation.
Once downloaded please extract it and you will get similar files like given below;
4. Now download the Odin app from the below link or download the latest version of Odin;
When the download has finished please extract the file to your PC desktop and open the “Odin..xxx.exe” file.
5. In the next step you need to enter your Galaxy S24 Smartphone into the “download mode“.
For that first you need to switch of your Galaxy S24 device. Now switch it back on and when you see the “Samsung” logo on the screen press and hold “Volume Down + Volume Up” and connect your mobile with your PC using a USB data cable.
Now when you get the above warning message on your phone screen press “Vol Up” button to enter into the “Download Mode“. You may also try the below video tutorial if you have any confusion which uses a different method. The demo phone used here is M30s. Please follow this link to watch the video.
6. Now go back to your Odin window which looks like the below screenshot;
In the next step select the extracted firmware files (done in step-3) corresponding to each buttons in the odin app. For example click on button “CP” and select the extracted firmware file which starts with “CP“. Same way click on “AP” and and select the extracted firmware file which starts with “AP“. Similarly, add BL file in the BL button.
If you want to factory reset while you install stock firmware select the file which starts with “CSC” file for the CSC button, otherwise, load the “HOME_CSC” instead.
Make sure F.Reset.Time and Auto Reboot option are the only ones checked in the Odin’s “Options” tab.
If you don’t want the previous data on your phone please skip the last button on Odin which is “UMS” or “USERDATA“.
7. Once everything is done as said above, click the “Start” button in the Odin app and wait for the flashing process to get finished. Finally when it’s done your phone will reboot and you will get a “Pass” message from the Odin app which confirms successful firmware installation.
However, if you got any Odin error while installing the firmware please try the below tutorial to which may solve the problem.
- How To Resolve Odin Flash Failed Error On Galaxy Smartphone?
- How To Fix “An Error Occurred While Updating The Device Software” On Galaxy Smartphone?
Compatible Models
- Samsung Galaxy S24 : SM-S921B, SM-S921B/DS, SM-S921U, SM-S921U1, SM-S921W, SM-S921N, SM-S9210, SM-S921E, SM-S921E/DS
What is Stock ROM?
A stock ROM refers to the firmware that comes pre-installed on a device such as a smartphone or tablet. It is the version of the operating system that the manufacturer provides, which includes the default user interface, system apps, and settings. Stock ROMs are specific to each device model and are typically unmodified and unrooted, reflecting the original software provided by the device manufacturer.
Normal queries to install Android 14 On Galaxy S24
- Install android 14 on Samsung Galaxy S24 free
- Install stock rom on Samsung Galaxy S24 download
- Samsung S24 firmware update
- Samsung S24 flash file
- S24 software
- S24 ROM
However if you have faced any issues which needs any support while trying to install Stock ROM, Android 14 on Galaxy S24 , please feel free to post it in the comment section below, don’t worry I will help you as fast as I can.
If “How To Install Android 14 On Samsung Galaxy S24?” tutorial really helped you, please give a like/share on social networking websites by using the below given buttons.