How To Root Samsung Galaxy Note 4 SM-N9100 on KitKat 4.4.4?

How To Root Samsung Galaxy Note 4 SM-N9100 on KitKat 4.4.4?

Hi guys, I am going to tell you something which may freak you out. I am warning you so my part is over. If you are good to go then, the chainfire group already released the root exploit of our the freshly baked Samsung Galaxy Note 4 SM-N9100 running on Android KitKat 4.4.4. Don't lie, now you are really freaked out.

As you already know this monster Mobile Phone Tablet hybrid comes with a large 5.7 inches Super AMOLED display, 16MP camera and 3GB RAM.

Can you believe that, the device is released during the first week of this month and the root is ready in few days, OMG!

Please note that rooting will void your warranty, but you can always unroot it to reinstate warranty. SamsungSFour.Com will not be liable for any damage caused as a result of executing the below given steps.

Before proceeding with any of the steps below please make sure that you have made a backup of all your personal files on the Samsung Galaxy Note 4 SM-N9100 and it is at least charged to 80% of battery power.

Steps To Root Samsung Galaxy Note 4 SM-N9100 running on Android KitKat 4.4.4

1. Please download the "CF Auto Root" files along with the Odin from here

2. Once downloaded please extract it to your PC desktop. Please check the below image for the extracted content.

How To Root Samsung Galaxy Note 4 SM-N9100 on KitKat 4.4.4?

3. Now enable "USB debugging" on your Galaxy Note 4 SM-N9100. To enable USB debugging go to Settings->More-> Developer Options. Alternately you can try the dedicated tutorial to enable USB debugging mode on your Samsung Galaxy Smartphone  by following the below given link.

How To Enable USB Debugging Mode On Samsung Android 4.3 Phone

4. Once you have enabled USB debugging mode switch of your device and enter it in "Download Mode".When your Galaxy Note 4 is completely in power down status switch it back on by pressing and holding "Home"+"Power"+"Volume Down" buttons at the same. Release the buttons once you get the warning screen like in the screenshot given below.

How To Root Samsung Galaxy Note 4 SM-N9100 on KitKat 4.4.4?

3. Once you get the above screen press "Volume Up" button to confirm the action, now your Samsung Galaxy Note 4 will be in the "Download Mode". You will be able to see a similar screen like the one shown in the screen print below.

How To Root Samsung Galaxy Note 4 SM-N9100 on KitKat 4.4.4?

4. Now run Odin as administrator and connect your Galaxy Note 4 with your PC using the USB cable. If the connection was successful you will get an "Added" from the "Odin".

5. Once you get the "Added" message from the "Odin" click "PDA" button and select the tar.md5 file you have downloaded and extracted earlier to your PC desktop.

6. Now confirm that nothing is checked except "Auto Reboot" and "F.Reset Time". Once you are confident that everything is done as instructed click the "Start" button in the "Odin" and wait for the rooting procedure to get completed on your Samsung Galaxy Note 4 SM-N9100.

7. When the process is completed your device will reboot and you also will get a "Pass" message from the "Odin".

That's it guys now your brand new monster phone is rooted with super user privileges.

 

If you have faced any issues while trying to root Samsung Galaxy Note 4 SM-N9100 running on Android KitKat 4.4.4, please feel free to post it in the comment section below, don't worry I will help you as fast I can.

Or

If "How To Root Samsung Galaxy Note 4 SM-N9100 on KitKat 4.4.4?" tutorial really helped you, please give a like/share on social networking websites by using the below given buttons.

Comments   

#12 0 Thomas2014-11-19 15:26
Quoting adam b:
followed the steps got to installing custom operating system pressed up to install, Odin has been stuck caching, phone says ...set warranty bit:cache and odin says .... Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
CF-Auto-Root-trltechn-trlteduoszc-smn9100.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Added!!
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
cache.img.ext4
RQT_CLOSE !!

phone will not re start and I need help , I do have a warrenty but I doubt Samsung will help bc I m rooting

Are you able to see your phone model number? Or is is completely dead. What ever the case just remove the batteries and reinsert it. Then enter into recovery mode. The steps are cleary mentioned here http://www.samsungsfour.com/tutorials/how-to-enter-samsung-galaxy-smartphone-in-recovery-mode-all-models.html
Once you are in recovery mode select "wipe cache partition". And select "reboot system now" after that.
Quote
#11 0 adam b2014-11-18 18:33
followed the steps got to installing custom operating system pressed up to install, Odin has been stuck caching, phone says ...set warranty bit:cache and odin says .... Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
CF-Auto-Root-tr ltechn-trlteduo szc-smn9100.tar .md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Added!!
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection ..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
cache.img.ext4
RQT_CLOSE !!


phone will not re start and I need help , I do have a warrenty but I doubt Samsung will help bc I m rooting
Quote
#10 -1 Thomas2014-11-08 19:01
Quoting Neil Kittipalo:
Living in China. N9100 is available here but has no Google Apps.
If I root one would I be able to install gapps?

Please read this forum post; http://forum.xda-developers.com/note-4/help/getting-google-play-store-international-t2920369
Quote
#9 0 Neil Kittipalo2014-11-08 05:13
Living in China. N9100 is available here but has no Google Apps.
If I root one would I be able to install gapps?
Quote
#8 0 Thomas2014-10-21 17:51
Quoting Jeff B:
Here's a screen shot of my phone settingshttps://www.dropbox.com/s/2fn2fn5azgix9eq/Screenshot_2014-10-20-18-17-28.png?dl=0

Will the root that you have work on my phone? (Please oh please oh please.

Sorry friend it will not work. Your model is AT&T version of note 4 while this method is only for note 4 SM-N9100
Quote
#7 0 Jeff B2014-10-21 01:35
Here's a screen shot of my phone settingshttps://www.dropbox.com/s/2fn2fn5azgix9eq/Screenshot_2014-10-20-18-17-28.png?dl=0

Will the root that you have work on my phone? (Please oh please oh please.
Quote
#6 0 Thomas2014-10-20 15:32
Quoting jon:
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
CF-Auto-Root-trltechn-trlteduoszc-smn9100.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
cache.img.ext4


and after that no more continue... how?

Is your phone model number and firmware version exactly the same; Samsung Galaxy Note 4 SM-N9100 and KitKat 4.4.4?
Did your phone restarted?
Quote
#5 0 jon2014-10-20 05:34
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
CF-Auto-Root-tr ltechn-trlteduo szc-smn9100.tar .md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection ..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
cache.img.ext4


and after that no more continue... how?
Quote
#4 +1 Thomas2014-10-19 17:55
Quoting Jeff b:

I will let you know once I publish it. Don't worry it will not take long. :-)
Quote
#3 0 Jeff b2014-10-19 15:56
AT&T note 4 is not supported. Only international specific model is supported.

Bummer lol

Is there a root for the US model?
Quote

Add comment

This is a family friendly website so should be the comments, please be informed that anything which cannot be read in public will not be published here. Anyone who write abusive comments will be banned and will not be able to post in the future.

Security code Refresh